CSC(color) anti-slip ultra-thin sealant

CSC ultra-thin seal material is made of high-quality minerals as a stable material, adding special surfactants, and processing rubber oil, petroleum resin, modified polymers, etc. through a special emulsification process. Professional spraying equipment or paving Equipment construction, the color of the material remains durable, with good adhesion and aging resistance.

Send email to us

Product Detail

PRODUCT PARAMETER

Product Tags

Environmentally friendly materials

Short construction time

Noise reduction

Ready to ship

CSC(COLOR)

ANTI-SLIP ULTRA-THIN SEALANT

CSC color ultra-thin seal material is made of high-quality minerals as stable materials, adding special surfactants, and processing rubber oil, petroleum resin, modified polymers, etc. through a special emulsification process. Laying equipment construction, the color of the material remains durable, with good adhesion properties and aging resistance.

Before

After

PRODUCT ADVANTAGES

1. Delay the aging of the original asphalt pavement, extend the service time and improve the durability;
2.Close the gap and tiny crack of the road surface, prevent the water from seeping down and prevent the occurrence of water damage;
3.Improve the anti sliding performance and structural coefficient of the original pavement;
4. Supplement and improve the aging of asphalt membrane of asphalt pavement, and improve the state of lean oil;
5. Adopting factory production mode, the production of materials and the construction of sealing layer are low in energy consumption and environmental pollution;
6. The construction and maintenance time is short, the traffic can be opened quickly, and the construction requirements of urban environment can be met.

SCOPE OF APPLICATION

It is suitable for slow traffic systems such as pedestrian roads, landscape roads, bicycle paths, campus playgrounds, golf course lanes, and parking lots.

CONSTRUCTION DOSAGE

The spraying amount of the first layer is 1.0-1.3 kg/m2 (mixture), and the spraying amount of the second layer is 1.0-1.2kg/m2 (mixture).For double-layer spraying, the second layer should be sprayed after the first layer is dry.